5 axes , Traverse path: X 750 x Y 650 x Z 560 mm, Max table load: 600 kg, Table clamping surface D 650 / 800 x 650 mm , Chip conveyor, Tool magazine,
More information
Cylindrical grinding machine, Grinding length: 150 mm, Centre height: 100 mm , Workpiece weight: 5 kg, Grinding diameter: 500 mm , Orbital diameter: 80 mm,
More information
Wire EDM machine, Traverse path: X 500 Y 350 Z 256 mm , Workpiece weight 400 kg, with automatic wire threading, Cutting in water bath , cooler,
More information
Wire EDM machine, Traverse path: X 350 Y 250 Z 256 mm, Workpiece weight 450 kg, with automatic wire threading, Cutting in water bath ,
More information
VIB-Nr: 01-29266
Index MS 32 6 2020 | good | Ø 32 mm | Index C200-SL |
6-spindle machine, Single NCU, Slide unit 1.1 X-axis and Z-axis NC-controlled, Slide unit 1.2 X-axis rigid, Z-axis NC-controlled, Slide unit 2.1 X-axis rigid, Z-axis NC-controlled, Slide unit 2.2 X-ax
More information
VIB-Nr: 01-29263
Traub TNK 36 2010 | good | Ø 36 mm | Traub System TX 8i |
Main and counter spindle, Turret, C-axis on main and counter spindle, Workpiece removal device, Chip conveyor, Fire extinguishing system, Resy compact belt filter, Short bar loader LNS Quick Load Serv
More information
VIB-Nr: 01-29262
Traub TNK 36 2004 | good | Ø 36 mm | TRAUB TX 8i |
Main and counter spindle, Turret, C-axis on main and counter spindle, Axfix chuck on counter spindle, Workpiece removal device, Chip conveyor, Resy compact belt filter, Short bar loader LNS,
More information
VIB-Nr: 01-29252
Traub TNX 200 2023 | very good | Ø 76 mm | Traub TX 8i-S V8 |
Main and counter spindle , Upper turret with 12 driven stations, 2 lower turrets with 12 driven stations each, Chip conveyor, LNS magazine ,
More information
Turret plate consisting of 4 stations, 1 spindle holder with 3 GA-PP basic holders, HSK 63, HSK 40, SK 30, SK 40 adapters and pulling elements , Conversion 2011: Conversion and upgrade mechanically,
More information
VIB-Nr: 01-29249
Traub TNL 18 2011 | good | Ø 18 mm | Traub TX 8i-s |
Main and counter spindle, turret, Parts conveyor belt, High pressure 50 bar, Additional high-pressure pump 140 bar , Kraft and Bauer fire extinguishing system, Some tools, Resy belt filter, Chip conv
More information
VIB-Nr: 01-29248
Traub TNL 18 2011 | good | Ø 18 mm | Traub TX 8i-s |
Main and counter spindle, turret, Parts conveyor belt, High pressure, Fire extinguishing system, Some tools, Resy belt filter, Chip conveyor, Loading magazine FMB Minimag 20,
More information
Main spindle, C-axis, Nordmann tool monitoring, Knoll chip conveyor, Knoll cooling lubricant system, Fire extinguishing system Kraft u. Bauer,
More information
5 axes, A and B axis, Traverse path: Z 600 X 600 Y 700 mm, Table load 600 kg, Table diameter 630 mm, Tool holder SK 40 , Tool magazine with 60 pockets , Spindle overhauled incl. clamp / stator / int
More information
VIB-Nr: 01-29237
Index G 420 2023 | very good | Ø 120 mm | Siemens S 840 D |
Main and counter spindle, C-axis on main and counter spindle, 2 turrets, Tailstock, Schunk three-jaw chuck, Cooling unit, Chip conveyor, Tool changer with chain magazine ,
More information
Conventional universal milling and drilling machine , Clamping surface: 1,300 x 320 mm, Maximum load: 400 kg, Longitudinal travel X: 760 mm, Transverse travel Y: 350 mm, Vertical travel Z: 500 mm, Sp
More information
Horizontal machining centre, Traverse path: X 560 / Y 630 / Z 600 mm, Pallet size: 400 x 400 mm, Max: Load: 400 kg, Spindle holder: SK 40, Tool magazine: 80 places, chain, there are 2 machines availab
More information
Vertical milling machine, Traverse path: X 2,134 / Y 813 / Z 762 mm, Spindle holder: SK 50, Internal cooling supply: 69 bar, Renishaw wireless touch probe system, Tool magazine: 30 places, disc, 2 mac
More information
Traverse path: X 1,250 / Y 1,000 / Z 1,050 mm, Spindle holder: SK 50, Pallet changer with 2 pallets, Internal cooling supply: 40/80 bar, Max. Max. load: 2,000 kg, Tool magazine: 120 places, chain,
More information
VIB-Nr: 01-29227
Heller MC 16 2000 | good | Heller Unipro 90 |
Traverse path: X 630 / Y 630 / Z 630 mm, B-axis, Spindle holder SK 40, Internal cooling supply: 50 bar, Pallet size: 400 x 500 mm, Tool magazine: 80 places, there are 4 machines for sale,
More information
Charge: 1,800 x 900 x 900 mm, Weight: max. 2,500 kg, Roller shutters instead of maintenance doors, Flood tank 1, heated, solvent immersion cleaning, Vacuum unit / refrigeration system, Control cabinet
More information
8-spindle machine, CNC on position 5 and 6, High-pressure cooling oil system 80 bar with plate filter, Additional magnetic roller, chip conveyor, IEMCA loading magazine for 4 metre bars ,
More information
Automatic circular saw, Saw blade diameter max. 425 mm, Cutting range round 10 - 140 mm, Disposal conveyor belt , Deposit table, Sick light grid protection , Bar loader ,
More information
Double spindle, Axis travel: X 550 / Y 400 / Z 360 mm, Tool holder HSK-A63, Chip conveyor with scraper belt, Coolant system KF 150 / FKA 500, Tool magazine 16 places per spindle, Bearing damage on spi
More information
VIB-Nr: 01-29209
Chiron DZ 12 W 2020 | good | Siemens 840 D SL |
Double spindle, 4 axes plus swivel table, Spindle distance 250 mm, Axis travel: X 550 / Y 400 / Z 400 mm, Spindle speed 24,000 rpm, max. 45 Nm, HSK-A50, Fanuc Automation ROBOT M-10IA/12S, Chip conveyo
More information
VIB-Nr: 01-29208
Chiron DZ 12 W 2020 | good | Siemens 840 D SL |
Double spindle, 4 axes plus swivel table, Spindle distance 250 mm, Axis travel: X 550 / Y 400 / Z 400 mm, Spindle speed 24,000 rpm, max. 45 Nm, HSK-A50, Fanuc Automation ROBOT M-10IA/12S, Chip conveyo
More information
VIB-Nr: 01-29197
STAR SR-32 JN 2015 | good | Ø 36 mm | FANUC 32i-B |
Main and counter spindle, C-axis on main and counter spindle, Rear end machining, Coolant pump with increased delivery rate 3.4 bar , Mayfran chip conveyor, FMB turbo 3-36 / 3200 ‘A’ loading maga
More information
VIB-Nr: 01-29196
STAR SR 20 RII 2007 | good | Ø 20 mm | Fanuc 18i-TB |
Main and counter spindle, Rear end machining , Parts conveyor belt, High-pressure pump 50 bar, Parts conveyor belt, Some tools, Loading magazine FMB 3-26 / 3200,
More information
Solvent: DOWCLENE 1621, Basket dimensions: (L x W x H) 670 x 480 x 350 mm, Throughput: 6 - 8 batches , Batch weight: 150 kg, Ultrasound,
More information
5 axes , Traverse path: X 550 x Y 400 mm x / 360 mm, 3D probe, Hydraulic tool clamping , HSK A63 tool holder, Chain magazine with 48 pockets ,
More information
Main and counter spindle, Top tool carrier with motorized milling spindle (X, Y, Z and B axes), HSK 40, C-axis, Conveyor belt, Belt filter, High pressure 20 bar, Drill breakage control, Knoll coolant
More information
VIB-Nr: 01-29182
Index ABC 42 2001 | good | Ø 42 mm | Siemens C200-4 |
Main and counter spindle, turret, Parts conveyor belt, Kraft & Bauer fire extinguishing system, Knoll chip conveyor, Loading magazine Schmid LM 3200 ,
More information
Compact cleaning system for water-based media, 3 bath system with spray cleaning, Drying with hot air, Batch weight: 40 kg, Feeding: manual & automatic, No ultrasound,
More information
VIB-Nr: 01-29173
Index G 300 2000 | good | Ø 65 mm | Siemens C 200-4 |
Main and counter spindle, C-axis on main and counter spindle, 12-position turret, High pressure, Chip conveyor, Promot EPL gantry loader ,
More information
Wire EDM machine, Traverse path: X 500 Y 350 Z 300 mm, Table dimensions 780 x 630 mm, with Flopy Emulator USB, Machine has been overhauled,
More information
Axis travel: X 550 / Y 400 / Z 360 mm, Double spindle, Tool holder HSK-A63, Coolant system KF 150/FKA500, Chip conveyor, Tool magazine 16 places per spindle , Bearing damage spindle 1, guide X-axis,
More information
Horizontal machining centre, Traverse path: X 560 mm x Y 560 mm x Z 660 mm, Bürner filter system, High pressure, Chip conveyor , Tool magazine with 40 places, Machine is dismantled,
More information
Main and counter spindle, 3 turrets, Driven tools (without tools), Tool holder: VDI 30, Parts unloading, Coolant tank 600 litres , Some tools, Loader Breuning IRCO ILS-MUK,
More information
VIB-Nr: 01-29140
Traub TNL 12 K 2003 | good | Ø 12 mm | Mitsubishi TX8i |
Main and counter spindle, C-axis on main and counter spindle, 2 turrets, Low pressure pump, High pressure 30 bar, Belt filter Resy, Sinteco robot 2 axes in the counter spindle, Loading magazine IEMCA
More information
Main spindle passage 65 mm, Counter spindle passage 52 mm, Turret with 24 stations , High pressure , Chip conveyor, Magazine IEMCA Master Verso 865/33/MP,
More information
Ultrasonic cleaning system, Automatic loading conveyor belt, Rinsing tank with demineralised water, Preservation tray, Hot air oven, Unloading conveyor belt,
More information
Travelling column 3 - axis, Travelling distance: X 1500 Y 300 Z 315 mm , Table size 1800 x 350 mm, Tool holder SK 40, Internal cooling, Chip conveyor,
More information
Vertical machining centre, Traverse path: X 440 - Y 290 - Z 270 mm , Table size 500 x 320 mm, Tool changer, Internal cooling supply, Chip box,
More information
Travelling distance 350 x 240 x 340 mm, tool holder SK 40, electric handwheel, Universal swivelling rotary table 400 x 280 mm, Rotating table 360 degrees , Coolant device,
More information
Travelling distance X: 760 mm, Y: 460 mm, Z: 460 mm, Blow-out device, High-speed tool changer as double-arm changer for 24 tools, SK 40 tool package, High pressure 20 bar, Workpiece measuring probe, C
More information
VIB-Nr: 01-29076
Index MS 32 P 2001 | good | Ø 32 mm | Index C 200 |
6-spindle machine, 8 additional drives, Artis NCU1 tool monitoring system, Two external cooling circuits for both control cabinets, loading magazine,
More information
Grinding disc 400 x 203 mm, Control disc 225 x 127 mm , Fire extinguishing system Kraft u. Bauer, Knoll ultra-fine filter, Steuli lifting station,
More information
Profile width CNC axis X: 120 mm, Profile width CNC axis Y: 30 mm, Sanding stroke: Length, infinitely variable W2 0-80 mm, Lehman dividing head EA-407.1A, Basic holder, Various sanding discs ,
More information
VIB-Nr: 01-29058
Traub TNK 42 2014 | good | Ø 42 mm | TX8i-s |
Hainbuch chuck ToPlus52, Fire extinguishing system Kraft u. Bauer, without tools, Resy belt filter, Chip conveyor, Loading magazine FMB turbo 5-55 / 3200 A,
More information
Camera selection machine with insertion into the blister, Scara robot Mitsubishi RH-12 FRH, Scara robot Mitsubishi RH-6 FRH, Vacuum suction cup, Indexing table, Measuring technology from IBR, Drawers,
More information
CNC turning and milling centre, 2 parallel main spindles, Counter spindle can move in three directions X / Y / Z to transfer the workpiece to the main spindle , Y-axis , Fire extinguishing system,
More information
CNC turning and milling centre, 2 parallel main spindles, Counter spindle can move in three directions X / Y / Z to transfer the workpiece to the main spindle , Y-axis , Fire extinguishing system,
More information
Travel: X-axis 200 x Y-axis 500 x Z-axis 425 mm, Tool holder HSK-A63, High pressure, Swivel carrier A- and U-axis with C- and W-axis 4-fold, Chip conveyor, Tool changer,
More information
5 axes, Travel: X-axis 670 x Y-axis 820 x Z-axis 600 mm , Tool holder HSK63, High pressure, Chip conveyor , Tool changer for 120 places,
More information
Factory reconditioned 2023, Basket size: L 530 x W 320 x H 300 mm , Washing medium: mod. Alcohol, Throughput: 6 - 8 batches /h, Batch weight: 50 kg, Automatic loading, Roller conveyor,
More information
Main and counter spindle, 2 x C-axis, 2 x rotary motor, Rotating tools on turret (2 x 24 positions), Y-axis on turret 1, Hainbuch collet system, FMB bar feeder (year 2002), High pressure coolant syste
More information
12 stations machine , Station 1: Sawing unit AE 30/60, Station 2: Feed unit VE 26/80, Station 3: Feed unit VE 20/50, Station 4: Feed unit VE 20/50, Station 5: Feed unit VE 26/80, Station 6: Turning u
More information
12 stations machine , Station 1: Sawing unit AE 30/60, Station 2: Feed unit VE 20/50, Station 3: Feed unit VE 26/80, Station 4: Feed unit VE 20/50, Station 5: Feed unit VE 20/50, Station 6: Feed unit
More information
12 stations machine , Station 1: Sawing unit AE 30/60, Station 2: Feed unit VE 20/50, Station 3: Feed unit VE 30/60, Station 4: Feed unit VE 30/60, Station 5: Feed unit VE 26/80, Station 6: Turning u
More information
VIB-Nr: 01-28842
Traub TNL 12 K 2003 | good | Ø 12 mm | Mitsubishi TX8i |
Main and counter spindle, 2 turrets with 6 driven stations each (without tools), C-axis on main and counter spindle, Parts version SINTECO robot 2 axes in counter spindle, High pressure, Chip conveyor
More information
3 Tank system (tank 3 is designed for preservation), Cleaning medium: hydrocarbon, Basket size: 520 x 320 x 200 mm, Ultrasound, Distillery, Water separator, Cyclone separator, Roller conveyor,
More information
VIB-Nr: 01-28744
Hanwha STL 38 H 2011 | good | Ø 38 mm | Siemens 840 D |
Main and counter spindle, 1 turret, driven tools (without tools), Backworking, Blow-out device, Discharge for long parts, High pressure unit, Chip conveyor , Loading magazine FMB Turbo 5-55,
More information
VIB-Nr: 01-28743
Hanwha STL 32 H 2011 | good | Ø 32 mm | Siemens 840 D |
Main and counter spindle, 1 turret, driven tools (without tools), Backworking, Blow-out device, Discharge for long parts, High pressure unit, Chip conveyor , Loading magazine FMB Turbo 3-36,
More information
Basic machine with 16-pitch, Coolant system, Oil mist extraction system, Tool breakage and wear monitoring for 8 tools, Fire protection system, Machining units:, 1 x Pick & Place , 1 x CNC-80-3 machi
More information
Cross slide , Part pre-drawing device , 2 x driven tool , Counter spindle, backworking 1 x rigid / 1 x driven, 2 x 80 bar HD pumps additionally ,
More information
Cross slide , Part pre-drawing device, 2 x driven tool, Counter spindle, backworking 1 x rigid / 1 x driven, 2 x 80 bar HD pumps additionally,
More information
3-spindle horizontal 4 axes machining center, travel X-axis: 300 mm, traverse path Y-axis: 500 mm, travel Z-axis: 450 mm, spindle distance: 300 mm, Chip conveyor Knoll, Knoll coolant system with paper
More information
10 stations machine, Machine is designed in double production with chuck tension, Combi Loop high pressure system , Coolant system Knoll 800 liters with magnetic roller and bag filter, ,
More information
The cleaning box is ideal for blowing off your parts before they are measured and packed by hand. Instead of blowing the dirt adhering to the parts into the environment with the "air gun", everything
More information