Click here and send us your offer without obligation
Buy a used INDEX MS40: At VIB, you’ll find used INDEX MS40-6 and MS40-8 CNC multi-spindle machines. We provide personalized advice, conduct technical evaluations of the machines, and assist with on-site inspections, disassembly, loading, transportation, and targeted procurement.
The INDEX MS40 is one of the established CNC multi-spindle lathes for the cost-effective series production of complex turned parts. With a spindle bore of up to 40 mm, the series combines high productivity with the versatile machining capabilities of modern CNC technology.
Anyone looking to buy a used INDEX MS40 will find a variety of models and machine configurations. Of particular note are the INDEX MS40-6 with six work spindles and the INDEX MS40-8 with eight work spindles. However, within these series, used machines can vary considerably—for example, in terms of tool holders, synchronous spindles, rear-side machining, control systems, bar-loading magazines, and other peripherals.
Therefore, when purchasing a used machine, decisions should not be based solely on the model, year of manufacture, and price. The decisive factor is whether the specific INDEX MS40 is technically suited to the planned manufacturing task.
VIB specializes in used machine tools and supports you in the search, technical evaluation, and transaction. Upon request, we can also arrange for disassembly, loading, and transport following the inspection.
The INDEX MS40 is a CNC-controlled multi-spindle automatic lathe for the productive manufacturing of precision turned parts. Unlike a traditional single-spindle lathe, multiple workpieces are machined simultaneously at different spindle positions.
For example, while an external contour is being turned on one spindle, drilling, grooving, threading, milling, or other machining operations can be performed simultaneously at other positions. After each machining cycle, the spindle drum advances to the next position.
The key advantage of this machine design lies in parallel machining. Multiple machining steps occur simultaneously, enabling very short cycle times.
The INDEX MS40 combines this multi-spindle principle with CNC-controlled tool carriers and, depending on the model, driven tools, additional axes, and devices for rear-side machining.
This makes the machine suitable not only for simple mass-produced turned parts but also for more complex precision parts requiring multiple machining operations.
The INDEX MS40-6 features six work spindles and is designed for workpieces or bar stock up to the machine’s spindle bore diameter of 40 mm.
According to current manufacturer specifications, the MS40-6 reaches up to 7,000 revolutions per minute and features six fluid-cooled motor spindles. Depending on the configuration, up to twelve tool holders can be used.
The MS40-6 is particularly interesting due to its various machining concepts. For example, a machine can be used as a classic six-spindle machine or—depending on its configuration—enable machining with synchronous spindles and rear-side machining.
Parallel machining of two workpieces is also possible with the appropriate machine configurations.
When purchasing a used INDEX MS40-6, therefore, one should not focus solely on the base model designation. Two machines designated as MS40-6 may be suitable for completely different machining tasks due to variations in their equipment.
Tool carriers, available synchronous spindles, powered tools, additional axes, and the complete peripheral equipment are therefore particularly important.
The INDEX MS40-8 expands the concept to eight work spindles. The additional machining space—or the greater number of spindle positions—allows for a different distribution of the individual machining steps.
INDEX also specifies a spindle bore of 40 mm and up to 7,000 revolutions per minute for the current MS40-8. In the appropriate configuration, up to 16 tool holders can be installed.
The larger number of machining positions can be particularly advantageous for complex workpieces, as individual operations can be distributed more strategically across multiple spindle positions.
Here, too, various manufacturing concepts are possible. The machine can be used as an eight-spindle machine or—depending on the configuration—can, for example, machine two workpieces in parallel on four spindle positions each, i.e., “double-four.”
In addition, powered tools enable machining operations that go well beyond conventional turning. Depending on the equipment, these include, among other things, cross-drilling, off-center drilling, threading, or milling operations.
When purchasing a used INDEX MS40-8, the exact machine configuration is therefore particularly important.
The most obvious difference is the number of work spindles:
INDEX MS40-6: six main spindles
INDEX MS40-8: eight main spindles
However, the question of which variant is better suited for a particular operation cannot be answered based solely on this number.
The specific workpiece and the required distribution of machining operations are decisive factors.
For a given component, six spindle positions may be entirely sufficient. For more complex parts or a machining sequence that can be divided more economically across multiple stations, an eight-spindle machine may offer advantages.
Equally relevant are tool holders, axes, synchronous spindles, and rear-side machining. A fully equipped MS40-6 may therefore be better suited for a specific manufacturing task than a more simply configured MS40-8—and vice versa.
When purchasing used machinery, the actual equipment should therefore always be compared with the planned component or range of parts.
The designation MS 40 refers to the machine series with a spindle bore of up to 40 mm.
This positions the series above smaller INDEX multi-spindle machines and makes it suitable for a wide range of turned parts made from bar stock.
Potential applications include, for example, mechanical engineering, the automotive and supplier industries, hydraulics and pneumatics, the valve industry, and numerous areas of industrial series production.
Depending on the workpiece and tooling concept, various machinable materials such as steel, stainless steel, aluminum, or brass can be processed.
However, whether an INDEX MS 40 is suitable for a specific workpiece does not depend solely on the diameter of the raw material. Workpiece length, geometry, required internal machining, milling operations, tolerances, and desired cycle time must also be taken into account.
Especially with a used INDEX MS 40, the configuration of the tool holders is one of the key selection criteria.
Multi-spindle machines achieve their productivity by distributing machining operations as efficiently as possible across the available spindle positions.
For complex workpieces, it can therefore be crucial to know which tool holders are available, what travel ranges are available, and whether driven tools can be used.
Additional axes further expand the machining capabilities.
When evaluating a used machine, it is therefore ideal to already know which machining steps are required for the planned workpiece.
Based on this, it is possible to assess whether the offered machine configuration is suitable or whether modifications or retrofits would be necessary.
For many turned parts, machining does not end with parting off.
Holes, flat surfaces, contours, or other features on the rear side of the workpiece must also be machined afterward.
Appropriately equipped INDEX MS40 machines can feature synchronous spindles and additional tools for rear-side machining to handle these tasks.
After machining on the main spindles, the workpiece can be transferred and further machined on the rear side.
This type of complete machining can reduce or completely eliminate the need for additional operations on a second machine.
When purchasing a used machine, it is therefore essential to carefully verify which synchronous spindles and rear-side machining capabilities are actually included with the machine.
A CNC multi-spindle machine like the INDEX MS40 typically does not operate alone during bar machining. A suitable bar-loading magazine is a key component of automated production.
For MS40 applications, there are—or were—specially adapted loading systems for bar diameters up to 40 mm, such as the MBL bar loader from Index or an IEMCA SIR bar loader.
When purchasing a used machine, it is therefore important to clarify whether a bar loader is included in the scope of delivery and whether it is compatible with the planned material and production process.
An existing magazine can have significant economic implications. If one is missing, the costs and technical integration of a suitable loading system must be factored into the investment analysis.
The same applies to other peripheral equipment such as chip conveyors, coolant and filter systems, oil mist extraction systems, fire suppression systems, or parts handling.
A used INDEX MS40 should therefore always be considered as a complete system.
INDEX MS40 machines have been and continue to be offered in various model years and development stages.
For this reason, the control system, user interface, and technical design of an older used machine may differ from those of a current new machine.
Particularly with regard to the control system, it is important to verify which generation of the Siemens control system is installed and how it fits into the buyer’s existing machine fleet.
Are operators already familiar with this control system? Are there programs or experience from other INDEX machines? What is the availability of spare parts and service like?
For modern machines, data backups, machine parameters, and existing programs also play an important role.
Therefore, the scope of documentation should also be reviewed at the time of purchase.
A used multi-spindle lathe is a complex production machine. An evaluation should therefore go beyond a mere visual inspection whenever possible.
Important points include:
The condition of the main spindles, spindle drum, and bearings; the condition of the tool slides and guides; the operation of the synchronous spindles; the condition of the powered tools; the control system, electrical and hydraulic systems; and the available peripherals.
If the machine is still connected to power, an inspection while it is operational is particularly valuable.
This allows you to assess movements, spindle operation, and basic machine functions. Ideally, a demonstration or machining test may even be possible.
If a machine is already disassembled or disconnected from power in storage, these options are limited. This should be factored into the technical and economic evaluation.
Operating hours are an interesting criterion, but should never be considered in isolation when evaluating a used INDEX MS40.
A machine with high operating hours may have been regularly maintained and be in very good technical condition. Conversely, a low number of operating hours does not automatically mean that a machine is problem-free.
More important is the overall picture, taking into account usage, maintenance, repairs performed, current condition, and available documentation.
If maintenance or repair records are available, they should be taken into account during the evaluation.
An INDEX MS40 is not a machine that should be loaded at short notice without proper planning.
The machine’s weight, dimensions, bar loading magazine, and other peripherals must be taken into account during disassembly and transport.
In addition, the conditions at the current location must be considered: hall height, door sizes, access roads, potential crane work, and the machine’s accessibility.
Early logistics planning prevents unnecessary delays and additional costs.
Upon request, VIB can assist with organizing disassembly, loading, and transport. This applies both within Germany and for international machine projects.
A used INDEX MS40 can be particularly attractive when additional production capacity is needed on short notice or when an existing machine needs to be supplemented or replaced.
Compared to a new machine, a used machine can require a significantly lower investment. Additionally, available used machines are often ready for use more quickly.
For companies that already use INDEX multi-spindle machines, a suitable used machine can offer further advantages. Experience with the machine design, control system, and operation is already in place, and, if necessary, tools, clamping devices, or existing spare parts can be reused.
However, the key factor is always whether the machine’s condition and configuration align with your planned production.
The cheapest INDEX MS40 isn’t automatically the best purchase—it’s the machine that can be put to productive use with as little additional effort as possible.
Especially with used multi-spindle lathes, availability depends heavily on when manufacturing companies replace machines or adjust their production capacities.
Therefore, a specific INDEX MS40-6 or MS40-8 is not always available.
If you are specifically looking to purchase a used INDEX MS40 and cannot currently find a suitable machine in our inventory, please contact us.
VIB has many years of experience in the trade of used machine tools and can conduct targeted searches for machines.
It is helpful to provide as specific requirements as possible: MS40-6 or MS40-8, desired year of manufacture, control system, rear-end machining, tooling, bar feeder, and other necessary peripherals.
The more precisely the requirements profile is defined, the more targeted the search can be.
VIB specializes in the purchase and sale of used machine tools.
When it comes to a used INDEX MS40, we consider not only the model and year of manufacture, but especially the specific equipment and intended application.
Would you like to buy a used INDEX MS40-6 or INDEX MS40-8? We’ll advise you personally, assist with the technical evaluation, and, upon request, also accompany you during the inspection, disassembly, loading, and transport.
If the MS40 you’re looking for isn’t currently available, we can conduct a targeted search for a suitable machine.
Would you like to sell an INDEX MS40 instead? VIB purchases used machine tools and markets them worldwide. For an initial assessment, the model, year of manufacture, control system, equipment, operating condition, location, and current photos are particularly helpful.
The INDEX MS40 is a CNC-controlled multi-spindle lathe for the productive series production of precision turned parts. It is available in various configurations, notably as the MS40-6 with six spindles or the MS40-8 with eight spindles.
On current INDEX MS40-6 and MS40-8 models, the maximum spindle bore is 40 mm. For used machines, the actual technical specifications of the specific machine and its year of manufacture should be verified.
The MS40-6 has six work spindles, while the MS40-8 has eight. In addition, the available tool holder, synchronous spindle, and machining configurations differ. Which variant is more suitable depends on the workpiece and the planned manufacturing process.
INDEX specifies a maximum spindle speed of 7,000 min⁻¹ for the current MS40-6 and MS40-8 models. For older used machines, the specific technical configuration should be checked.
Depending on the configuration, powered tools and additional axes can enable operations such as drilling, threading, and milling in addition to turning operations.
Machines equipped accordingly feature synchronous spindles and tools for rear-side machining. The specific equipment must be checked separately for each used machine.
No. For a used machine, the scope of delivery depends on the specific offer. Therefore, you should check whether a compatible bar loader and other peripherals are included.
Particularly important factors include the machine configuration, technical condition, main spindles, spindle drum, tool holders, synchronous spindles, control system, documentation, and peripherals. If possible, the machine should be inspected while powered on.
Yes. If there is currently no suitable INDEX MS40-6 or MS40-8 in stock, VIB can search specifically for a suitable used machine upon request. Please contact us!
Yes. Upon request, VIB assists with organizing the inspection, disassembly, loading, and transport—even for international machine projects.
Yes. VIB purchases used machine tools. For an initial assessment, please provide the model, year of manufacture, control system, equipment, location, and current photos.
The price depends, among other things, on the model, year of manufacture, control system, condition, tooling, synchronous spindles, bar feeder, and other peripherals. It is therefore not practical to provide a general price estimate.